 |
|
 |
|
 |
|
 |
|
 |
|
|
|
|
|
Features
Unlike concrete or plastic, which necessitate frequent replacements, recycled rubber car stops are safer and more durable. In-molded highly reflective tape (available in yellow or white) ensures visibility and pedestrian safety. The GNR Park-It® car stop is constructed of 100% recycled rubber.
The Park It® comes with pre-molded holes and can be shipped with anchoring spikes or lag bolts for installation. They are lightweight (15,5 kg.) and flexible; conforming to the contour of uneven road surfaces. Park-It® car stops are available in 55 cm, 90 cm, 120 cm, and 180 cm lengths and are covered by a 3 year warranty.  | Park It® Décor and Handicap Park It® |
Our exciting new and innovative generation of colored recycled rubber car stops have all the same product attributes as our original Park It®, but offer additional opportunities for the following applications:  |  | Park It® Décor For property owners / managers who are looking to enhance the aesthetic value of their property. The innovative terracotta color delivers an upscale look to any parking facility! | Handicap Park It® Specifically designed for handicap parking spaces. the blue colored rubber and white in-molded tape are immediately identifiable to differentiate handicap parking spaces. |
Park It® car stops are:
- Made of 100% recycled rubber
- Long lasting and cost efficient
- Ideal for indoor or outdoor parking
- Will not chip, crack, or fade
- High visibility at night
- Simple installation by one person
- Can be installed on any road surface
- Resistant to ultraviolet light, moisture, oil, and extreme temperatures
- Temporary or permanent installation
- 1/10th the weight of standard concrete curb
- Do not require heavy machinery
- Maintenance free
- 3 year warranty
|
|
|
Park It car stops have been used in the following locations:
- WalMart
- Target
- St. Frances Hospital
- McDonald's
- Burger King
- Eckerd
- Dunkin Donuts
- Bank One
- Hilton Hotels
- Montreal Children's Hospital
- El Conquistador resort
|
Installation Locations:
Surface parking lots
Multi-level parking lots
|
|
| |
|
|
| Dimensions |
|
| |
|
 |
|
Park-It® Curb Dimensions:
(L) 55 cm x (l) 15 cm x (H) 10 cm - 4,1 kg - 2 fixations
(L) 90 cm x (l) 15 cm x (H) 10 cm - 7,7 kg - 2 fixations
(L) 120 cm x (l) 15 cm x (H) 10 cm - 10,5 kg - 3 fixations
(L) 180 cm x (l) 15 cm x (H) 10 cm - 15,5 kg - 4 fixations
|
| |
|
|
|
| |
| Technical Specs |
|
| |
|
Product Name:
Rubber Car Stop
|
|
|
Models:
180 cm, 120 cm, 90 cm, 55 cm lengths
|
|
|
Product Description :
1. Material: compression molded composite of the 100% recycled rubber and polyurethane prepolymer
2. Physical properties of the rubber composite:
a) Density 17g/cm3 in (ASTM C642)
b) Durometer Hardness 65A ± 7 (ASTM D2240)
c) Tensile Strength* minimum 210 psi (ASTM D412)
(* main structural areas)
d) Compression deformation 10% at 70psi, 68°F (ASTM D575)
e) Brittleness at Low temperature: -40°F (ASTM D746)
f) Freeze and thaw when exposed to deicing chemicals (ASTM C672)
g) Coefficient of thermal expansion 8 x10-5 in/in/°F (ASTM C531)
h) Weathering 70 hours at 158°F (ASTM D573)
- hardness retained
100% (± 5%)
- compressive strength 100% (± 5%)
- tensile strength 100% (± 5%)
- elongation retained 100% (± 5%)
3. Available models: 180 cm, 120 cm, 90 cm, 55 cm lengths
4. Finishing: Black with in-molded reflective pavement marking tape in yellow, blue or white parallelograms
|
|
|
|
|
Componets:
a) 100% recycled rubber from car and truck tires (NR, SBR)
b) polyurethane prepolymer for rubber granules
c) yellow, white, or blue durable and reflective in-molded pavement marking tape
|
| |
| |
| Installation Guide |
| |
| Components |
|
|
- Park-It car stops
- 356x13mm rebar spikes for asphalt or lag bolts with washers and metal shields for concrete - available at GNR
|
| What You Need |
| |
- Gloves, safety glasses
- Traffic cones, drums or barricades for securing the site
- Mallet
- Heavy duty electric drill
- 12mm masonry bit, and if installed with the lag bolts: a masonry bit required for the metal shields - consult bit size on side of shield
- A drive socket and a power tool for installation of the lag bolts
The flexible design of the Park-It parking curb allows the product to conform to the contour of uneven road surfaces and can be installed on both asphalt and concrete.
|
|
|
| Installations Instructions for Asphalt: Installation of Park-It car stops with spikes |
| |
Step 1.
Drill 12mm diameter holes (75-100mm in depth) in the asphalt through the product's holes.
|
|
|
| Step 2.
Drive rebar spikes (356x13mm) through the holes in the product.
|
 |
|
|
|
|
** Park-Its can also be installed on asphalt with lag bolts and shields. Please consult instructions below for installation using bolts and shields.
|
|
Installation Instructions for Concrete: Installation of Park-It car stops with lag bolts and metal shields
|
|
Step 1.
Use M12x180 lag bolts and plastic shields.
|
 |
|
|
|
| Step 2.
Drill 12mm diameter pilot holes (75-100mm in depth) through the product's installation holes.
|
 |
|
|
|
Step 3.
Remove the product; re-drill the holes for the diameter and depth required by the metal shields
|
|
|
|
Step 4.
Install the metal shields, re-position the product and bolt with lag bolts and washers.
|
|
|
|
Maintenance
|
|
|
| Park-It curbs require minimal maintenance. Periodically inspect the bolts and tighten if necessary. |
| |
|
|
